ברוכים הבאים למרכז הדפסה בתלת מימד

מדפסת תלת מימד מסוג אפ פלוס 2

זמינות: במלאי

Only 3 left

8,424.00 ₪

סקירה מהירה

A small 3d printer with excelent print quality

מדפסת תלת מימד מסוג אפ פלוס 2

לחץ פעמיים על התמונה להגדלה

הקטן
הגדל

תמונות נוספות

פרטים

The UP Plus 2 features automatic platform levelling along with automatic platform height detection. The all new UP Plus 2 is the latest version of the award-winning UP Plus 3D Printer. It is closely based on its predecessor, but with a host of innovative new refinements.

auto platform heightauto leveling

The clever 3D Print software that comes with your 3D Printer does the hardest job of all. No matter how complex your 3D model is, the visual printer software driver will work out where it needs to support the model during printing. Then the 3D Printer prints the support material in a lower density at the same time as printing the part. That’s smart stuff! Once the model has been printed, you simply just break away the support material. So no need to worry if your part or model will print. Since it is all automatic, all you need to do is click ‘Print’. The UP Plus 3D printer and software will analyse your design, see where support will be required and then build it all for you. 

Build platform

140mm width, 140mm depth, 135mm height

Smart Support

Intelligent snap off support material, printed in the same material, printed at a lower density and built automatically by the included 3D print software

Selectable layer resolution

0.15mm (150 micron), 0.2mm, 0.25mm, 0.3mm, 0.4mm – That’s a super fine detail of 150 micron!

Raftless printing

Yes

Print speed

3-30mm3/sec

Dimension

245mm width,260mm depth, 350mm height

Weight

5kg

Shipping Weight

10kg

Power input

110-220VAC, 50-60Hz, 220W

Connectivity

USB (Print job stored and spooled to Printer, ability to turn off computer during printing.)

Consumables

1.75mm ABS Plastic Filament

Warranty

12 months

Software

STL 3D layout and printing software included free: Windows (XP,Vista,7,8) 32/64 bit and MAC


היה ראשון לתת חוות דעת על מוצר זה

תגיות המוצר

השתמש ברווחים על מנת להפריד בין התגיות. השתמש בגרשיים בודדות (') לביטוים.