ברוכים הבאים למרכז הדפסה בתלת מימד

High Temperature Resistant Annealable Carbon Fiber PLA Composite 2.85mm

זמינות: חסר במלאי

468.00 ₪

סקירה מהירה

Proto-Pasta (USA made) 500g High Temp Carbon Fiber PLA 2.85mm diameter

High Temperature Resistant Annealable Carbon Fiber PLA Composite 2.85mm

לחץ פעמיים על התמונה להגדלה

הקטן
הגדל

תמונות נוספות

פרטים

500g High Temp Carbon Fiber PLA (HTPLA-CF) combines engineering-grade performance with the ease and eco-friendliness of PLA printing.

Compared to ABS and PET-like materials, HTPLA-CF has:
  • Easier and more reliable printing
    • No heated bed required
    • Lower processing temperatures, like standard PLA
    • Less warping and distortion when processing
  • More temperature resistance* for maintaining properties to higher temperatures
    • HTPLA-CF maintains properties up to 120C or more (*when annealed)
    • ABS and PET get soft at 80C +/- 10C
  • Higher strength and better strength-to-weight ratio for stronger parts with less material 
  • Improved surface hardness for less wear in abrasive environments
  • Less shrinkage and distortion for more accurate parts
  • Higher stiffness so parts hold their shape
  • Renewable biopolymer with low odor
  • Highly desirable black finish 

HTPLA-CF is easy to print and also has a potential Heat Deflection Temperature (HDT) in excess of 140C (285F) depending on processing. To obtain good results annealing (also called heat treating or crystallizing) in an oven at 110C (225F) for an hour. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the oven to minimize distortion. Parts must be baked above 60C for any crystallization to occur.

Print Settings

Bed Temp (if available, is not required): 50° C

Hot End Temp: 215 – 230° C

Dual head printing: stick well to other PLA

היה ראשון לתת חוות דעת על מוצר זה

תגיות המוצר

השתמש ברווחים על מנת להפריד בין התגיות. השתמש בגרשיים בודדות (') לביטוים.