ברוכים הבאים למרכז הדפסה בתלת מימד

Black ASA-X 1.75mm filament

זמינות: במלאי

222.30 ₪

סקירה מהירה

Black ASA-X UV Resistent Filament 1.75mm, 0.75Kg

Black ASA-X 1.75mm filament

לחץ פעמיים על התמונה להגדלה

הקטן
הגדל

תמונות נוספות

פרטים

About ASA-X:

ASA-X @DF is our highly modified “industrial-grade” ASA filament with many features like UV resistance, zero warp technology and excellent mechanical properties. ASA-X is the perfect replacement when you require a performance material without the problems that can arise during printing with, for example, ABS. ASA-X not only has great strength and interlayer adhesion but also features one of the best aesthetics possible with FDM 3D printing. The reliable bed adhesion will ensure a smooth printing experience. ASA-X is perfect when you are looking for beautiful and strong prints that also last outside. 

Our Black ASA-X 2.85mm filament:

ASA-X can be used on any printer which can print ABS, you need a heated bed and an extruder that can reach at least 235˚C:

Usage:

ASA combines mechanical strength and UV stability with the best part aesthetics FDM technology has to offer. Build enduring prototypes to test fit, form and function – or produce practical production parts for outdoor use. From electrical housings and brackets to sporting goods and automotive prototypes, and is UV resistant.

Properties

Material

ASA-X (Acrylonitrile Styrene Acrylate)

Color

Black

Filament diameter

1.75mm +-0.05mm

Roundness

95%

Print temperature

235-255˚C

Net Weight

0.75Kg

Gross Weight

1.1Kg

Spool dimensions

200mm(Diameter)X76mm(Height)

Spool Hub diameter

52mm

Packaging

vacuum packed with desiccant 

 

Recommendations, Tips & Tricks

It is recommended to use a heated print bed when printing ASA-X set to approximately 100°C-110°C. And if you have a heated chamber such as the one in the 3NTR machines a temp of 65-78°C should be used.

As always good first layer adhesion is of the utmost importance in obtaining the best results for your prints. There are several tricks to get the first layer of your ABS print to stick better to the print bed of your 3D printer.

  • Use of PEI tape.
  • Use polyimide tape (Kapton tape or PET tape). ABS prints usually stick better to polyimide tape than to the print bed. When preparing the print bed it is better to have small gaps between your strokes of tape, rather than having overlaps. Overlaps of smaller pieces of tape may cause difficulties later on during the print process. 
  • Coat your print bed with hairspray. ABS has a tendency to stick really well to extra strong hairsprays.

PEI Ptape, PET tape and Kapton tape are unlikely to leave a residue on your print bed. Hairspray and ABS/Acetone juice coatings will leave a residue on your print bed.

היה ראשון לתת חוות דעת על מוצר זה

תגיות המוצר

השתמש ברווחים על מנת להפריד בין התגיות. השתמש בגרשיים בודדות (') לביטוים.